DiffusionCyl Class

class electrical.diffusion.DiffusionCyl(name='')

Calculates carrier pairs concentration in active region using FEM in two-dimensional cylindrical space

Methods

compute([loops, shb, reg])

Run diffusion calculations

compute_overthreshold()

Deprecated method.

compute_threshold()

Deprecated method.

get_burning_for_mode(mode)

Get power burned over threshold by specified mode [mW].

get_total_burning()

Get total power burned over threshold [mW].

initialize()

Initialize solver.

invalidate()

Set the solver back to uninitialized state.

Attributes

Receivers

inCurrentDensity

Receiver of the current density required for computations [kA/cm²].

inGain

Receiver of the material gain required for computations [1/cm].

inLightE

Receiver of the electric field required for computations [V/m].

inTemperature

Receiver of the temperature required for computations [K].

inWavelength

Receiver of the wavelength required for computations [nm].

Providers

outCarriersConcentration

Provider of the computed carriers concentration [1/cm³].

Other

algorithm

Chosen matrix factorization algorithm

geometry

Geometry provided to the solver

id

Id of the solver object.

initialized

True if the solver has been initialized.

iterative

Iterative matrix parameters (see IterativeParams)

maxerr

Maximum relative residual error (%)

mesh

Mesh provided to the solver

Descriptions

Method Details

DiffusionCyl.compute(loops=0, shb=False, reg=None)

Run diffusion calculations

Parameters:

  • loops (int) – Number of iterations to perform. If 0, the solver will run until the convergence.

  • shb (bool) – If True, the solver will use take into account the spatial hole burning effect.

  • reg (int or None) – Index of the active region to compute. If None, perform computations for all the active regions.

DiffusionCyl.compute_overthreshold()

Deprecated method. Use compute(shb=True) instead.

DiffusionCyl.compute_threshold()

Deprecated method. Use compute() instead.

DiffusionCyl.get_burning_for_mode(mode)

Get power burned over threshold by specified mode [mW].

DiffusionCyl.get_total_burning()

Get total power burned over threshold [mW].

DiffusionCyl.initialize()

Initialize solver.

This method manually initialized the solver and sets initialized to True. Normally calling it is not necessary, as each solver automatically initializes itself when needed.

Returns:

solver initialized state prior to this method call.

Return type:

bool

DiffusionCyl.invalidate()

Set the solver back to uninitialized state.

This method frees the memory allocated by the solver and sets initialized to False.

Receiver Details

DiffusionCyl.inCurrentDensity = <property object>

Receiver of the current density required for computations [kA/cm²].

You will find usage details in the documentation of the receiver class CurrentDensityReceiverCyl.

Example

Connect the receiver to a provider from some other solver:

>>> solver.inCurrentDensity = other_solver.outCurrentDensity

See also

Receciver class: plask.flow.CurrentDensityReceiverCyl

Provider class: plask.flow.CurrentDensityProviderCyl

Data filter: plask.filter.CurrentDensityFilterCyl

DiffusionCyl.inGain = <property object>

Receiver of the material gain required for computations [1/cm]. It is required only for the SHB computations.

You will find usage details in the documentation of the receiver class GainReceiverCyl.

Example

Connect the receiver to a provider from some other solver:

>>> solver.inGain = other_solver.outGain

See also

Receciver class: plask.flow.GainReceiverCyl

Provider class: plask.flow.GainProviderCyl

Data filter: plask.filter.GainFilterCyl

DiffusionCyl.inLightE = <property object>

Receiver of the electric field required for computations [V/m]. It is required only for the SHB computations.

You will find usage details in the documentation of the receiver class ModeLightEReceiverCyl.

Example

Connect the receiver to a provider from some other solver:

>>> solver.inLightE = other_solver.outModeLightE

See also

Receciver class: plask.flow.ModeLightEReceiverCyl

Provider class: plask.flow.ModeLightEProviderCyl

Data filter: plask.filter.ModeLightEFilterCyl

DiffusionCyl.inTemperature = <property object>

Receiver of the temperature required for computations [K].

You will find usage details in the documentation of the receiver class TemperatureReceiverCyl.

Example

Connect the receiver to a provider from some other solver:

>>> solver.inTemperature = other_solver.outTemperature

See also

Receciver class: plask.flow.TemperatureReceiverCyl

Provider class: plask.flow.TemperatureProviderCyl

Data filter: plask.filter.TemperatureFilterCyl

DiffusionCyl.inWavelength = <property object>

Receiver of the wavelength required for computations [nm]. It is required only for the SHB computations.

You will find usage details in the documentation of the receiver class ModeWavelengthReceiver.

Example

Connect the receiver to a provider from some other solver:

>>> solver.inWavelength = other_solver.outModeWavelength

See also

Receciver class: plask.flow.ModeWavelengthReceiver

Provider class: plask.flow.ModeWavelengthProvider

Data filter: plask.filter.ModeWavelengthFilter

Provider Details

DiffusionCyl.outCarriersConcentration(n=0, mesh, interpolation='default') = <property object>

Provider of the computed carriers concentration [1/cm³].

Parameters:

  • type (str) – Detailed information which carriers are returned. It can be ‘majority’ to return majority carriers in given material, ‘pairs’ for the concentration of electron-hole pairs, ‘electrons’, or ‘holes’ for particular carriers type.

  • mesh (mesh) – Target mesh to get the field at.

  • interpolation (str) – Requested interpolation method.

Returns:

Data with the carriers concentration on the specified mesh [1/cm³].

You may obtain the number of different values this provider can return by testing its length.

Example

Connect the provider to a receiver in some other solver:

>>> other_solver.inCarriersConcentration = solver.outCarriersConcentration

Obtain the provided field:

>>> solver.outCarriersConcentration(0, mesh)
<plask.Data at 0x1234567>

Test the number of provided values:

>>> len(solver.outCarriersConcentration)
3

See also

Provider class: plask.flow.CarriersConcentrationProviderCyl

Receciver class: plask.flow.CarriersConcentrationReceiverCyl

Attribute Details

DiffusionCyl.algorithm = <property object>

Chosen matrix factorization algorithm

DiffusionCyl.geometry = <property object>

Geometry provided to the solver

DiffusionCyl.id = <property object>

Id of the solver object. (read only)

Example

>>> mysolver.id
mysolver:category.type
DiffusionCyl.initialized = <property object>

True if the solver has been initialized. (read only)

Solvers usually get initialized at the beginning of the computations. You can clean the initialization state and free the memory by calling the invalidate() method.

DiffusionCyl.iterative = <property object>

Iterative matrix parameters (see IterativeParams)

DiffusionCyl.maxerr = <property object>

Maximum relative residual error (%)

DiffusionCyl.mesh = <property object>

Mesh provided to the solver